Get instruction
This page explains what standards bodies, federations and makers publish. It is not a substitute for instruction from a qualified instructor or guide, and it does not replace medical advice.
Who decides
Every figure on this page is one maker's or body's dated statement about its own products. None is a universal rule. Whether a particular item stays in use is decided by its maker's instructions and a competent person.
Why makers publish a lifespan at all
Regulation (EU) 2016/425, Annex II point 1.4(e), requires the maker's information to give, where applicable, the month and year or period of obsolescence of the product or its parts. The European Commission's guidelines (5th edition, October 2025) say this can be an expiry date, a limit on use, or an incident, giving a harness after a fall and a helmet after an impact as examples. They also say makers do not have to mark a date of manufacture.
The BMC's Technical Group wrote in 1999 that since the European PPE directive took effect, which it dated to 1995, makers of gear that degrades must give lifetime guidance, usually as a shelf-life figure and an in-use figure. The amended Directive itself (Directive 89/686/EEC, Article 16, as replaced by Directive 93/95/EEC) let member states permit, until 30 June 1995, the marketing of equipment that met their own national rules in force on 30 June 1992; 1995 was the end of that transition period. It described shelf life as the time in average storage after which significant degradation may have happened and called those figures conservative. It called in-use life "rough guidance at best", and said physical checks and first-hand knowledge of the gear's history are the most reliable indicators.
The UIAA, introducing its inspection recommendations (undated), adds that a standard only sets a baseline for new equipment in the laboratory, and that the maker is the primary source for any specific product.
Makers' statements side by side
| Source and date | Product | Stated lifespan |
|---|---|---|
| Petzl, March 2024 | Dynamic ropes | 10 years |
| Sterling, November 2019 | Dynamic ropes | Up to 1 year with extensive use, up to 5 years with regular to occasional use, up to 10 years if rarely used; storage plus use never over 10 years |
| Edelrid, October 2013 | Dynamic ropes | 12 years unused with optimal storage; 10 years with occasional use; possibly a few weeks with frequent or extreme use |
| Beal, 2014 (ropes) and 2019 (harnesses) | Ropes and harnesses | Up to 5 years of storage plus up to 10 years in use, 15 years in total |
| DMM, undated | Textile and plastic products | 10 years from date of manufacture |
| DMM, undated | Metal products | No time limit |
| Black Diamond, 2019 | Helmets | 10 years from date of manufacture, even if unused |
| Black Diamond, 2016 | Ice tools | 1 to 5 years under normal use, depending on type and part |
| Blue Ice, undated | Crampons | Metal parts unlimited if unused and well stored; textile parts up to 5 years of storage then 10 years from first use |
| Edelrid, October 2025 | MAGO 8 belay device | "No limitation" |
| BMC text via the UIAA, 2001 | Karabiners | At least 20 years if properly looked after |
| BMC text, 2001 | Camming devices | Most should last 10 years with average use and no serious falls |
Where the statements disagree
Maximum rope age
For their own ropes, Sterling caps storage plus use at 10 years (2019), Edelrid allows 12 years unused (2013), and Beal allows up to 15 years including 5 years of storage (2014).
When the clock starts
DMM and Black Diamond count from the date of manufacture; Petzl's 2024 rope notice gives 10 years without saying when the count starts. Blue Ice counts its 10 textile years from first use. Beal counts years in use separately from up to 5 years of storage. Two items of the same age can therefore be at very different points in their makers' stated lives.
Metal gear
DMM, Blue Ice and Edelrid give their metal products no time limit, and the 2001 BMC text expects karabiners to last at least 20 years. Black Diamond's 2016 ice tool figures are far shorter, from 1 to 5 years under normal use. A climbing website, in an article we could not date, reports DMM and Wild Country as recommending a 10-year maximum for metal parts, which DMM's own instructions contradict. Petzl is quoted in search snippets as giving metal products an unlimited lifetime; we could not open that page, so Petzl's position on metal is unconfirmed.
How often gear is examined
Petzl recommends a detailed inspection by a competent person at least every 12 months, more often with intense use (rope notice, 2024). A DMM harness document, seen only in search results and without a date, is said to recommend a thorough examination at least every six months; that is unconfirmed.
Where the makers agree
Across the statements cited above (Petzl 2024, Beal 2014 and 2019, Edelrid 2013, Sterling 2019, Black Diamond 2019 and DMM), the reasons makers give for retiring gear early overlap: a major fall or load, a failed inspection, contact with chemicals, visible damage, an unknown history or a marking that can no longer be read, and any doubt about reliability. Several of them, including Petzl, Beal, Black Diamond and DMM, say gear may need retiring after a single use, or even before first use if it is damaged. Sterling notes that chemical damage can be invisible.
Several makers present their time limits as maximums rather than promises; Beal, for example, calls its figure only a potential lifetime. Each maker's own instructions describe what it treats as a reason to retire its product.
Shared equipment
The BMC said in 1999 that the questions its Technical Group was asked most often concerned retiring equipment, especially gear held in pools. It said pool managers often set a fixed retirement period unless damage appears sooner, and gave the example of a heavily used climbing centre retiring lead ropes after one year and a rarely used one after about four years, calling both reasonable if based on an understanding of how the gear degrades. The BMC also said its Technical Group had by then spent thirty years investigating equipment failures and written over 300 reports.
The gear care page sets out what makers say about storage and cleaning, which they link to lifespan, and the recalls page lists products withdrawn regardless of age.
Sources
- European Commission, PPE Regulation (EU) 2016/425 Guidelines, 5th edition (October 2025)
- BMC, Care and maintenance (Technical Group, 30 March 1999)
- Directive 93/95/EEC amending Directive 89/686/EEC, Article 1(3) replacing Article 16 (official text, lagen.nu copy)
- UIAA, foreword to the UIAA 121 recommendations (undated) and BMC text (2001)
- Petzl, technical notice LEAD, R0012200G (maker, 26 March 2024)
- Beal, Tiger 10 mm technical information (maker document, December 2014, third-party copy)
- Beal, sport harness notice (maker, 2019)
- Edelrid, dynamic rope instructions E-500521-000 (maker, October 2013)
- Edelrid, MAGO 8 instructions (maker, 9 October 2025)
- Sterling, Dynamic Rope Care, Use and Retirement (maker, November 2019)
- DMM, slings and lanyards instructions (maker, undated)
- Black Diamond, helmet instructions MM5887 (maker, 2019)
- Black Diamond, ice tool instructions (maker, 2016, hosted by a DAV section)
- Blue Ice, crampon instructions 100708-B (maker, undated, copy hosted by a retailer)
- BMC, frictional anchor care and maintenance (Alan Huyton, 2001), distributed with UIAA materials (third-party copy)
- Climbing website, Spring clean your rack (third-party summary)